How do you take care of a scuba regulator?
Submerge the regulator in fresh water for a short period and gently rotate any moving parts to ensure any salt residue is rinsed off or dissolves. Allow the regulator to dry completely before storing. As an extra precaution, use alcohol or antibacterial mouthwash to sanitize the second stage mouthpiece.
How often should a scuba regulator be serviced?
Your regulator should be serviced annually (with some brands 2 years, and we will talk about this shortly) no matter if you have 1 dive or 100 dives.
When should a regulator not be rinsed?
Rinsing alone, however, will not sufficiently clean the regulator. To clean the regulator as thoroughly as possible, it is necessary to soak it in warm, not over 49°C (120°F), tap water for at least one hour.
How do you clean corrosion off a scuba regulator?
Contributor. The proper vinegar solution is a 50/50 mix of white vinegar and water. Do not soak longer than necessary as it will strip damaged chrome. If you are boat diving, a very common but overlooked place where salt water gets into a reg is the tank valve.
How do you soak a scuba regulator?
To clean the regulator as thoroughly as possible, it should be soaked in warm (not over 120º F) tap water. a. The preferred method is to attach the regulator to a charged SCUBA cylinder, open the cylinder valve to pressurize the regulator, and thoroughly soak both the first and second stages.
When rinsing your regulator you should always remember to?
Remember, rinsing the scuba unit while pressurized helps prevent water from entering the system and causing any damage. [THREE] Guide a stream of fresh water into the regulator mouthpiece allowing water to drain from both sides of the exhaust tee.
What is the primary function of a scuba regulator?
A diving regulator is a pressure regulator that controls the pressure of breathing gas for diving. The most commonly recognised application is to reduce pressurized breathing gas to ambient pressure and deliver it to the diver, but there are also other types of gas pressure regulator used for diving applications.
Can I service my own scuba regulator?
Many divers with no formal factory training successfully service their own regs. BUT they do so after getting some kind of education on just how regulators work, how they are designed, and knowing what tools to get. And then you have to get the parts. For some models it’s easy.
How much does it cost to service scuba regulators?
Scuba Regulator Repair
|Annual Regulator Service (Plus Parts)||$59.95|
|Annual BCD Service (Plus Parts)||$19.95|
|Annual BCD with Octo Service (Plus Parts)||$29.95|
|Bladder Repair (Up to 3 Small Holes)||$50.00|
|Computer Battery Replacement (Most Models)||$19.95|
Do new scuba regulators need to be serviced?
Most manufacturers still require that their gear is serviced annually, or after 80 to 100 dives, whichever comes first. … If you want your regulator to be inspected before a dive trip, always leave enough time to do at least one or two dives or pool sessions after a service.